Device Alarms in NSM

While using NSM, I have noticed that I have an alarm for one device but I couldn’t see what the alarm is really about.

Right click on the alarm was only bringing the normal device menu but nothing else. Then I found that I have to follow Investigate->Realtime Monitor->Device Monitor path to see the alarm content. It is good to note it here:)

About: rtoodtoo

Worked for more than 10 years as a Network/Support Engineer and also interested in Python, Linux, Security and SD-WAN // JNCIE-SEC #223 / RHCE / PCNSE

You have a feedback?